MATROX
Matrox Multi Ingest 4-Channel
3G/HD/SD Input Card/MFR # MULTI/IN - Open
Box Sale $599
Note: Matrox is no longer updating drivers for this card.
The Matrox 2-Channel Multi-I/O Card is a simultaneous, independent 2-channel input and output 3G/HD/SD card that can be installed in Mac Pro and Apple Xserve systems. This card brings a new level of channel density to Mac-based systems.
It is designed for good performance, flexibility, and scalability. It shares a memory-centric, asynchronous architecture that provides high-speed transfers of video, audio, and graphics data between I/O peripherals, co-processors, the CPU, and host memory. On-board DMA engines allow data transfers to occur without any intervention from the CPU. Dedicated on-board 10-bit hardware scalers off-load CPU or GPU processes.
The full range of broadcast-quality video / audio inputs and outputs
are supported in NTSC and PAL as well as 480p, 720p, 1080p, and 1080i
HD resolutions at all frame rates. It supports 4:3 and 16:9 aspect ratios.
Single-slot, 3/4 length PCI-e x8 card fits into Mac Pro and
Apple Xserve systems Video Inputs: Up to 4 multi-rate 3G
/ HD / SD SDI or 2 3G level B, or 2 dual link, or 2 video
and key 10-bit hardware scaling engine supports up to 4 HD streams or
8 SD streams 16 embedded audio I/O channels per SDI stream 4 unbalanced
analog audio channels for monitoring Support for SDI ancillary data such
as ATC, AFD, and CC Analog blackburst reference input (tri-level or bi-level)
with loop through Auto-detection of input video resolutions One analog
LTC input RS-422 port for device control Supported by the Matrox SDK
for Mac.
Compatible With Mac Pro and Apple Xserve systems.