3422 Dundas Street West, Toronto, ON
416-604-1492 /1-866-252-1394
416

Updated Dec 13/2017

 

Thread Adapters, Screws

 

Manfrotto 120 Adapter - $35 - in stock
Changes 3/8 thread to 1/4-20 to allow you to put tripod heads with a smaller thread size like Joby on your tripod. Also good for recorders, monitors, camera lighta, any accessory with a 1/4-20 thread that needs a bit more support. Less likely to cross thread and get stuck than cheaper adapters.

Manfrotto 088LBP Adapter - $16 - in stock
Allows you to adapt a 1/4 -20 thread to a 3/8 thread with a supportive collar. Good for putting tripod heads on monopods or for putting recorders on boom poles. Less likely to cross thread and get stuck than cheaper adapters.

Wooden Camera Bag of Screws - $22 - in stock
An assortment of screws used for Wooden Camera Handles, NATOs, Rod Clamps, Shoulder Rigs, and more. 4 of each screw type are included.
1/4-20 x 1/4 socket cap
1/4-20 x 3/8 socket cap
1/4-20 x 3/8 button head
1/4-20 x 1/2 socket cap
1/4-20 x 5/8 button head
1/4-20 x 3/4 socket cap
1/4-20 x 7/8 button head
1/4-20 x 1 socket cap

Find tripod screws here

SmallRig Big Double Head 1/4-20 to 1/4-20 adapter (859) - $5 - in stock
26mm diameter.

Small Rig 1/4-20 Small Double End Stud - $5 - in stock

Windtech 1/4-3/8 Adapter - $10 - in stock
This handy little screw adapter has a male 1/4-20 thread on one end, and a male 3/8-16 thread on the other. The entire unit is 3/4" inch long, or 2 cm.

SmallRig 1065 3/8-3/8 Adapter - $6 - in stock
Small 3/8-16 male to 3/8-16 male thread adapter.

Small Rig 3/8 -1/4 Adapter - $6 - in stock
(1027) Small brass 3/8-16 female to 1/4-20 male thread adapter. Usually used on light stands to convert
a 3/8" thread to a 1/4-20" thread to mount flashes, recorders or anything with a 1/4-20" thread.

Manfrotto 015 adapter - $13 - in stock
3/8F to 1/4-20M thread adapter, useful to put a digital recorder on a boom pole or light stand, etc.

K&M 3/8" F TO 5/8" M Adapter - $5 - in stock
Converts a 5/8" mic holder to a 3/8" thread for boom pole mount.

Promaster 1/4-20F to 3/8M Adapter - $3 - in stock
Simple 1/4-20" to 3/8 adapter - makes a 1/4-20" thread bigger into a 3/8" thread.

On Stage Stands 5/8 female to 1/4 male adapter (MA125) - $5 - in stock
This adapter allows you to mount anything that takes a 1/4-20 thread onto a mic stand or boom pole.

On Stage Stands 5/8 female to 3/8 male adapter (MA100) - $5 - in stock
This adapter allows you to mount anything that takes a 3/8 thread onto a mic stand or boom pole.

ON-Stage CM01 Adapter - $14 - on back order
The CM-01 thread adapter provides an adjustable ball socket design that rotates 360 degrees and adjusts up to 90 degrees. Female 5/8" standard microphone thread to male 1/4"-20 standard photo thread. Adjustment knob locks ball socket position as well as an Allen head locking screw. Large metal serrated knob, with padded surface, for 1/4" male thread. Padded area on top section prevents scratching and insures a secure fit. Great for attaching small cameras, digital field recorders like the Zoom H4N or small LCD monitors to any microphone stand. Max load 5 lbs.

Find light stud and spigot adapters here

Find accessory shoe to 1/4 and 3/8 adapters here