3422 Dundas Street West, Toronto, ON
416-604-1492 /1-866-252-1394
416

Updated May 23/23

Blackmagic Design URSA Mini Pro Accessories

Blackmagic URSA Mini Pro PL Mount - $355 - special order
(CINEURSAMUPROTPL)
* For Lenses with PL Mount
* Cooke i/Technology Compatible Pins
* Includes Shim Kit

Blackmagic URSA Mini Pro Shim Kit - $115 - in stock
(CINEURSAMUPROSHM) Includes 9 shims and a baffle removal tool. This allows you to adjust the flange distance of your lens mount to tweak for precise focus. These shims can be used with any of the replaceable lens mounts for the URSA Mini Pro cameras.

Blackmagic URSA Mini Shoulder Kit - $569 - special order
Be ready to shoot anywhere! Kit includes shoulder pad with built in rosettes, rail mounts, integrated tripod quick lock release and top handle.

Blackmagic Ursa Viewfinder - $2199 - special order
The Blackmagic URSA Viewfinder is designed specifically for use with the URSA and URSA mini digital film cameras. It features a high-resolution 1920 x 1080 color OLED display, precision glass optics, and an adjustable diopter to fine tune to your vision. It also has a built-in digital focus chart to help when focusing on your subjects. To boost the longevity of the OLED screen, the viewfinder uses a built-in sensor that only turns the screen on when your looking through it. It screws directly onto the top of your URSA camera and is adjustable, so it can be used with the left or the right eye.
* Designed for Blackmagic URSA and URSA Mini
* 1920 x 1080 OLED screen
* Glass optics
* Adjustable diopter
* Digital focus chart
* Eye-sensor turns OLED screen off when not in use to preserve screen life
* Built-in record light
* Left and right eye switchable

Blackmagic URSA Viewfinder Eyecup - $35 - in stock
Lose or damage your rubber eyecup for the Ursa Viewfinder? Here's the replacement.

Blackmagic URSA Handgrip - $289 - special order
URSA side handgrip and strap. 2 LANC cables.

Small Rig URSA Mini Pro Side Plate - $99 - special order
(1854) SmallRig Side Plate for Blackmagic URSA Mini/URSA MINI PRO 1854 is exclusively designed for Blackmagic Ursa Mini/Ursa Mini Pro camera. ARRI locating holes could attach SmallRig 15mm Clamp with ARRI Accessory Mount 3/8’’-16 Hole 2001. NATO rail could mount SmallRig EVF Mount 1594, and 1/4-20 threaded holes could attach accessories with 1/4 screws, like magic arms. Cold shoe could attach wireless voice receiver with cold shoe mount and SmallRig Articulating Rosette Arm(7") 1497. M6 threaded holes are utilized to lock the camera tight with screws. ARRI rosette could attach SmallRig ARRI Extension Arm 1807 and then SmallRig Right Side Wooden Handle 1941 for shoulder carrying. 4 Convexes fit the camera completely and reduce the pressure on the rosette, and 4 rubber cushions on them could prevent the cameras from scratches.

Small Rig URSA Mini Pro Top Handle Kit for URSA Mini Pro - $159 - special order
(2029) SmallRig Top Handle Kit 2029 is exclusively designed for Blackmagic URSA Mini/ Mini Pro. It includes Top Plate & Top Handle.
Key Features:
* It is compatible with original Blackmagic URSA Mini EVF
* Rod clamp could be attached to 15mm rod for more accessories
* Cold shoes could attach microphone or attach Magic Arm 1497 for monitor
* Arri locating points could attach Anti-rotation Magic Arm Adapter 1978 for monitor
* It is equipped with 1/4’’ and 3/8’’ threaded holes for DIY options
Top Plate
The top plate could attach to the top of camera via three 1/4’’ screws on the one end, and it is also compatible with EVF. The top plate could attach Top Handle 2000 firmly via three 1/4’’ screws on the other end. An original 3/8’’ screw is used to lock the EVF and top plate tight.
Top Handle
The rod clamp on the right side could attach to 15mm rod for more accessories, such as NATO Rail 1910 to connect EVF support and then monitor. M5 wingnut is utilized to lock rod clamp tight. Both ends of handle are equipped with cold shoes, which could attach microphone or attach Magic Arm 1497 for monitor. Arri locating points could attach Anti-rotation Magic Arm Adapter 1978 or attach Magic Arm 2026 for monitor. It can be locked tight with Top Plate 1958 via three 1/4’’ screws. It is also equipped with an array of 1/4’’ and 3/8’’ threaded holes for DIY options. An original EVF screw of Blackmagic URSA Mini is used to lock Top Plate 1958 and original EVF as well. Top Handle 2000 fits original EVF perfectly.

Blackmagic Ursa V-Mount Battery Plate - $139 - special order
Power your URSA off V-Mount batteries. Connects directly to the back of the URSA, avoiding the need for extra cabling.

Blackmagic Ursa Gold Battery Plate - $139 - special order
Power your URSA off Gold Mount batteries. Connects directly to the back of the URSA, avoiding the need for extra cabling.