Updated May 122
Genus
Genus Loupe Viewfinder - Reg $139 SALE $79 - in stock
The Genus Loupe Viewfinder is the ultimate tool for use with 3-inch LCD screens. With a 2.5X magnifying lens, the G-LV allows you to clearly see your images on a larger scale. Easy to install and adjust, the Genus Loupe Viewfinder Kit comes with one black hood, one translucent hood, a mounting frame, magnifying lens and a convenient lanyard. One of the biggest challenges in shooting video with your DSLR is making critical focus and exposure decisions with your camera's small LCD screen, especially in bright outdoor light. The Genus Loupe LCD Viewfinder blocks ambient light and allows you to see your LCD screen clearly, with 2.5X magnification and diopter adjustment. The Genus Loupe has a removable adhesive frame mount for your camera's LCD, so you can keep the Loupe Mounted if preferred. It also comes with a lanyard if you prefer to wear your Loupe around your neck and use as needed.The optional translucent hood is a bonus for viewing slides and prints!
Zacuto Z-Finder Pro 2.5X - $399 - in stock
The Z-Finder Pro 2.5x allows DSLR cameras to have the correct form factor
for video. It offers 2.5x focusable magnification, a 40mm diameter
Zacuto optical designed Anti-Fog lens, an eyecup preventing extraneous
light leakage, a diopter and a field of view perfectly matched to 3” LCD
screens. The diopter allows you to dial in the focus to match your
eye perfectly. If you need extra focal point you can use the Z-Finder
Extender Frames. The Z-Finder Pro 2.5x has a diopter range of -4.75
and up (unlimited with extender frames). These are semi-permanently
stackable frames that attach to the skirt of the Z-Finder Pro and extends
the Z-Finder glass further way from the LCD screen for people who are
farsighted. The Z-Finder Pro uses the Gorilla Baseplate and Z-Finder
mounting frame to mount to the camera. The Gorilla Baseplate attaches
to the bottom of your camera using a ¼ 20” screw and the
Z-Finder mounting frame attaches to the Gorilla Baseplate using thumb
screws. The rubber back mounting frame does not attach to your LCD;
it is held in place against your LCD with pressure. This method allows
you to quickly remove the Z-Finder Pro by snapping it off the frame.
If you want to remove the entire mounting frame from your camera, you
can do so by loosening the thumb screws and pulling up on the metal
mounting frame to release it. With the Z-Finder Pro, you are also a
step closer to using one of Zacuto's Gorilla Support Rigs, as they
use the same baseplate.
Zacuto Z-Finder Adhesive Mounting Frame - $6 - more in
soon
Z-FRM - Want to put your Z-Finder on multiple cameras? This is the answer.
Additional Z-Finder snap fit adhesive mounting frames. This frame will
work on the Z-Finder Pro and Jr as well. To use, simply take the mounting
frame and peel off the adhesive protection, then slowly bring the frame
down to the LCD screen being careful to align the edges of the frame
to the edges of the light LCD image. Before applying pressure make sure
that the frame is aligned and square. Apply pressure with some weight
such as a book for 24 hours too fully cure. After 24 hours, the Z-Finder
will snap on and off the frame.
Zacuto Z-Finder Mounting Frame for Small DSLR Bodies -
$50 - in stock
Z-MFS - The Z-Finder Aircraft Aluminum Frame must be used in conjunction
with the Gorilla plate.
Zacuto Z-Finder Mounting Frame Z-MFSB - $129 - special order
The Zacuto Z-Finder Mounting Frame for DSLRs with Battery Grips is required when mounting a Z-Finder to the 3" LCD screens of small-body cameras--from the Canon 5D Mark II to the Nikon D90--equipped with battery grips. This longer frame attaches to a required Gorilla Plate using two thumb screws; then, with the frame's rubber edges pressing snugly against the LCD screen, the Z-Finder can snap quickly into the frame and be just as easily removed.Works with Z-Finder Pro 2.5x, 3x, and Jr. (Gorilla Plate not included with Z-Finder Jr.--must be purchased separately) Made of aircraft aluminum • Non-stick rubber coating seals off light and prevents scratching of camera.
Zacuto EVF Snap - $659 - in stock
The EVF snap is Zacuto's standard electronic viewfinder that
has the Zacuto Z-Finder Frame built into the unit. The Z-Finder Pro or
Jr. snaps on and off the monitor. Therefore, you can use the monitor as
a small onboard monitor or as an electronic viewfinder by itself.
Zacuto EVF Flip - Reg $759 Sale
$679 - limited stock
The EVF Flip has a Z-Finder frame built into the unit that can be flipped
open to 180 degrees. You can also pop off the Z-Finder and use the electronic
viewfinder as a monitor similar to the EVF Snap. You can use the Z-Finder
Pro or Jr. on this model as well. This is essential when working handheld
with a producer or director so you can show him the shot without having
to have him get his eye in the viewfinder. You just flip up and he can
see the shot.
Zacuto EVF Pro - $979 - more in soon
This is a complete electronic viewfinder with a diopter.
It includes the EVF Flip model and an optical viewfinder, which will snap
onto the frame on the monitor and can flip up 180 degrees. The optical
viewfinder contains high quality 2.5x optics with anti-fog shields and
a diopter. The anti-fog is extremely important for reducing fog. It will
also include extender frames. The Z-Finder Extender Frames allow you to
further adjust the focal point of the Z-Finder by semi-permanently stacking
the frames via a snap fit on to the skirt of the Z-Finder until the LCD
screen is in focus for you. If you want to be able to use your Z-Finder
on your camera LCD screen, you will need to purchase the gorilla plate
and frame separately. It is not included in this kit.
All electronic viewfinders include a standard hotshoe EVF mount, HDMI cable, rechargeable battery, battery charger, lens cloth and protection case.
Find Zacuto Baseplates and Accessories here