Updated Feb 10/12
TABLE DOLLIES AND SLIDERS
Hague Cam-Slide - $329 - in stock
Demo in store for testing
The Cam-Slide is quick and simple to set up, it can be mounted to any sturdy tripod or placed on a table or the floor for low shots. The carriage is supplied with a Ball Levelling Head to mount the camera on, or if preferred you can use your own head from your tripod. Both 1/4” and 3/8” threaded heads can be attached to the carriage, or you can mount the camera directly onto the carriage. Once the camera is mounted onto the carriage you can create supper smooth tracking shots as you slide the carriage down the track. The track is 1metre long and can be supported in various ways, there are 3/8” threaded mounting holes in each end, and one in the centre of the track to mount it directly to a tripod or across two tripods. Two 1/4" to 3/8" stepping bushes are supplied should the tripod have a 1/4" stud. Two track supports are also supplied for each end of the track, these support the Cam-Slide when it is used on a table or the floor and also prevent the carriage from coming off the end of the track. Suitable for all camcorders and cameras up to 2.5kg. The double rail track is made from hard anodized aluminium and the carriage has low wear, low friction bearings that do not require lubrication. It is resistant to dirt and dust.Track:- Length 1000mm. Width 50mm. End Supports:- Width 205 x 38mm. Carriage:- Length 100mm. Width 72mm. Total Weight:- 1.5kg. Cam-Slide Kit includes:- Track, Track supports, Carriage with 1/4” Screw, Three 1/4” to 3/8” Stepping Bushes, and a Ball Levelling Head.
Cinevate Pegasus Carbon All Terrain Slider CILTAS000033
Reg $1449
- Display
Model on Sale $999
The smoothest slider we've ever seen, the Cinevate CILTAS000033 is a Pegasus carbon fiber based linear tracking system that includes the Pegasus Table Dolly Kit, the Proteus Quick Release Base Plate System, the Pegasus Carbon All Terrain Legs Kit, the Carbon Fiber 15mm wide, 100cm (39 inches) long solid rails and the Proteus Articulating Links.
Hague Mini Table Dolly - Reg $119 Sale $99 - limited stock - ends Feb 29
See a video clip of this product here
The Hague MTD Mini Table Dolly enables you to create tracking shots on a table or any smooth surface. Suitable for handheld cameras.The Mini Table Dolly enables you to create tracking shots on a table or any smooth surface. The wheels are adjustable, so the dolly will either track in a straight line or the wheels can be set to track around an object. A small camera could be mounted directly onto the dolly, but if a ball head or a pan & tilt head is attached to the dolly it makes it much easier to get the camera into the required position and larger cameras can then be mounted. The dolly is supplied with a 1/4" screw to attach the camera and a 1/4" to 3/8" stepping collar for ball heads and pan & tilt heads with a 3/8" thread.
Supports up to 18kg. Approx size:- 25 x 25cm. Wheel diameter:- 8cm. Weight:- 1kg.
Please note: a ball head is not supplied with the dolly.
Hague Hi-Hat Table Dolly HTD - $419 - in stock
The Hague Hi-Hat Table Dolly enables you get tracking shots on a table,
board or any smooth surface, the 50mm diameter wheels have radial ball
bearings with twin rubber tyres which make the dolly easy and quiet to
move. The dolly will track in a straight line or can be adjusted to track
in an arc to go round an item. On top of the dolly is a Hi-Hat with a
100mm bowl, this has two sets of spacing studs, so extra low shots can
be achieved. A quick release camera plate on a claw-ball is also supplied
so your camera can be attached directly to the dolly and levelled off
or angled using the claw-ball. Alternatively your video head from your
tripod can be used on the dolly enabling you to both pan and tilt when
tracking, we also supply a stepper ring to reduce down to 75mm should
your tripods video head be using the 75mm levelling system.
The Table Dolly can also be use as a Hi-Hat in a static position by using
the supplied adjustable feet, this is ideal for low shots and where there
is no space for a tripod.
Dolly size:- Length 33cm. Width 34cm. Height 10cm or 19cm. Weight:-
2.5kg. Supports up to 16kg.
Cinevate Pegasus DSLR Table Dolly - $ - special order
- allow up to 2 weeks
Please call to check pricing and availability
This system includes articulating links, trucks and camera mount platform. Camera ball mount is not included. This system can also be run on any set of 15mm or 5/8" rails which are spaced 100mm apart on center. Recommended maximum weight is 12lbs (5.4kg).